Description
Dimensions:
- Completely Open: 12″ W x 9″ H
- Snapped Closed: 10″ W x 5.5″ H
- Inside Pocket: 4.75″ W
- Weight: 3oz
Accommodates 2x Road/Gravel Tubes (650b/700cx18mm–32mm) or 1x MTB Tube (26″/27.5″/29″x1.50″–2.5″)
Materials:
- USA Made 1000D Cordura Brand Shell
- Nylon Webbing Strap
- YKK Buckle
- DOT Stainless Steel Button
Installation:
- Squeeze the air out of that tube and roll it tight! Make sure you do not damage the tube with the valve stem as they tend to be sharp!
- Load your tube and tools, place them in the center pocket & secure the flap down with the snap.
- Tighten the buckle strap around the roll. Tighten the strap as much as possible (be sure to use the adjuster tri-glide to secure the excess webbing). Buckle the Tool Roll closed off the bike.
- Disengage the buckle and string it through the saddle rails. Feed the male buckle through the left saddle rail and the female buckle through the right saddle rail. Wrap the straps around the Tool Roll and buckle together. You will find that the webbing may be tight, and the buckle may be challenging to install but not to worry, that is all part of the process.
- Double check that the buckle is securely closed. Buckle may appear to be closed with a single click, but if there’s a 1/8 inch space at the buckles’ closing points, it is not securely closed. Make sure the closing points of the buckles are completely touching. Double-check the buckle before riding.
- Shred!
If installed correctly, there would be no sway or sag of the roll. It should be tight up against the saddle rails, and the contents should be secured.
“This product, like all of our products, is 100% vegan and crafted with the finest USA made materials and hardware. No animals were harmed during the making of this bag.” – Ester Song, CEO
